A.R.M.S. # 2 Scope Mount |
An excellent "handle mount" style scope mount for the M16 family
of rifles. It features the Swan universal mounting platform which accepts most
all current military and police sighting systems, including NATO Stanag and
Weaver type rails, without the need for adaptors.
Other Features
Include:
* "See thru" feature - use existing iron sights * Fast
positioning with fixed toggle bolt * Self-locking thumbnut - will not loosen *
Machined for continuous zero hold * Same tough finish as on your
weapon
|
|
|
|
|
A.R.M.S. #19 Weaver/Stanag Throw Lever Mount |
Interfaces to M16A1/A2/M4, when an ARMS#2 mount is used in the carry handle, or mounts directly onto the A3 flat-top receiver. Provides a universal platform for a variety of scopes, sights, night vision optics and lasers.
|
|
|
|
|
A.R.M.S. #19A Throw Lever Channel Mount for ACOG Sights |
The center "channel" allows solid mounting of Trijicon ACOG Scopes to any mil. spec. dovetail Weaver style rail with the ease and convenience of the A.R.M.S. repeat zero throw levers (position levers on the left side of the weapon so as not to obstruct the ejection port). Also includes a positioning crossbar to assure repeat positioning and a positive stop.
|
|
|
|
|
A.R.M.S. #22 Throw Lever Rings: Low - 1/4" rise |
Patented 30mm steel rings secured with A.R.M.S. dovetail system to an extruded aluminum platform. Built-in "No-Mar" pads protect the rail, and spring loaded levers act as shock absorbers. These rings will not freeze, or absorb mud or sand. They offer guaranteed repeat zero hold.
Options: Low - 1/4" rise (ARMS 22L) Medium - 1/2" rise (ARMS 22M) / High - 3/4" rise (ARMS 22H)
|
|
|
|
|
A.R.M.S. #37 Ring Inserts |
Steel inserts that allow use of 1" diameter scopes within 30mm ring sets.
|
|
|
|
|
A.R.M.S. #39A2 Bi-Level Rail |
Mounts to M16A1 & A2 Carry Handle
for multiple combinations of attachments, and provides rigid support of the
dovetail platform that is extended over the handguards. A "brush breaker" on the
front will prevent branches from snagging under the rail, and a "see-thru"
channel in the #39A2 Upper Rail allows the use of existing iron sights.
Note: This Rail System will not mount on the A3 Removable
Carry
Handle. See the A.R.M.S. S.I.R. System in the Handguards Section of
this catalog.
|
|
|
|
|
A.R.M.S. #5 Multibase |
Quick detachable; multiple eye relief; spring loaded clamping bar; Nato Stanag & Weaver rail fastening. Easily attaches to Weaver type rail or flat top receivers. Has self-locking captivated thumbnuts. Black finish.
|
|
|
|
|
Aimpoint SRP-M Quick Detach Mount for Comp M3 Sight |
A solid, simple 30mm wide-ring high mount with a large knurled thumbnut for easy on / easy off attachment to any MIL-Std 1913 Picatinny Rail. Optical center over the top of the Picatinny rail is 26.1mm (+/- 0.1 mm) - may require a riser block for sighting over a standard AR front sight.
|
|
|
|
|
Aluminum Scope Mount |
An anodized, machined aluminum, "see-thru" Picatinny rail mount (Weaver also) which allows use of existing iron sights. It attaches to the carry handle with a thumbnut.
|
|
|
|
|
Aluminum Scope Ring Sets: 1" Low |
Top quality, matte black finished ring sets to fit any Picatinny rail. U.S.A. made - heat treated aluminum with 8 32 socket head screws in 1" Low, Med. or High Profile horizontally split design. 30mm style is vertically split. Wrench included with each set.
Options: 1" Low, 1" Med, 1" High or 30mm Med
|
|
|
|
|
ARMS #22M68 Cantilever Extension |
Designed to align the Aimpoint CompM3 sight with the 3XMag Module when used with the ARMS #22M68 Ring Mount. Low standard height allows perfect Red Dot co-witnessing on M16/M4 models. Machined steel with grey phosphate finish.
|
|
|
|
|
ARMS #22M68 Ring Mount for Aimpoint CompM3 |
A rugged ARMS Mount designed with a wide clamping cradle for the CompM3. It features a single ARMS quick throw lever locking system to guarantee repeat zero on any Picatinny Rail - solid, quick, easy to mount or remove. The "no-mar"pad built into the throw lever protects the Picatinny rail's edges and the mount's two pieces can be separated for use with the Cantilever Spacer (at right) to match the CompM3 with the 3X Mag Module above.
|
|
|
|
|
First Samco Tactical Light Mounts |
These mounts will accept 1" or 15/16" diameter flashlights and hold them solidly onto your rifle or carbine with an internal rubberized pad-clamp. It slides onto the First Samco M33 Handguard rail
- or any Picatinny type rail - and locks in place with a rugged push button mechanism. Molded of high density black polymer.
Options:
* 15/16" diameter for Streamlight Scorpion and other
flashlights;
* 1" diameter for For Surefire & other tactical
flashlights.
|
|
|
|
|
Kwik-Site See-Thru Scope Mount and Scope Ring Set |
For A1 or A2 rifles with the solid carry handle, this mount features a wide see-thru channel to enable the use of existing open sights. Mounts to the handle with a large thumbnut.
A pair of 1" (internal diam.) horizontally split scope rings is included with this set.
|
|
|
|
|
Laser Mount for Carbon 15 Rifles & Pistols |
|
This mount clamps to the barrel fluting on the Type 97 Pistols and Type 97 / 97S Rifles to offer mounting for various lasers. Accepts 3/4" diameter lasers.
|
|
|
|
|
Leupold Mark 4 Steel Scope Rings: Medium Height |
In the field, the durability of your gear makes the difference between a successful hunt - or otherwise! Leupold Mark 4 Steel Scope Mount Rings are rugged, solid steel construction, and highly recoil resistant, so they're strong enough to withstand any abuse, yet precise enough to retain your rifle's accuracy. They mount easily onto any Picatinny rail. Sold per pair.
Options: Medium Height or High Height
|
|
|
|
|
Light Mount for Carbon 15 Pistols & Rifles |
|
This mount clamps to the barrel fluting on Type 97 Pistol and Type 97 / 97S Rifles to offer mounting for Mag-Lite Flashlight. Holds 3/4" diameter lights.
|
|
|
|
|
Riser Blocks for Picatinny Rail Flat-tops |
These black anodized aluminum mounts clamp onto Picatinny configuration rails to offer the extra height necessary to achieve a proper sight picture and comfortable cheek weld on the buttstock when using scopes with the AR type rifle. They attach with Allen Head screws, and two risers are required for most mounting applications (one for each ring).
|
|
|
|
|
Snap-on Forearm Light Mount |
This heavy plastic base (shown installed, and separately) snaps onto AR-15/M16 Rifle Forends (won't fit the CAR handguards). Detents grip the forend vent holes for afirm mount. On the side, a rail segment is mounted which is designed to accept a variety of tactical flashlights.
|
|
|
|
|
Spacer for Aimpoint TwistMount |
A companion piece to the TwistMount designed for "co-witnessing" between 3X Magnifier and CompM3 on same plane rails. It raises the 3XMag in the TwistMount to match the height of the CompM3.
|
|
|
|
|
SUREFIRE FLASHLIGHT MOUNT |
|
This mount clamps to the barrel fluting on Type 97 Pistol and Type 97 / 97S Rifles to offer mounting for SureFire lights. Takes 1" diameter flashlights. SureFire recommends their #650 Universal Weapon Light.
|
|
|
|
|
Trijicon TA51 Mount for ACOG Sights |
Knurled thumbnuts allow quick installation/removal on any mil. spec. Picatinny rail flat-top model. The ACOG Scope (above) mounts into the center channel with two screws - use Loctite to keep it from "shooting loose".
|
|
|
|
|
