A2 Carbine Length Handguards |
Same black composite polymer construction as above - heatshields included. These can only be used with the Round Handguard Cap.
|
|
|
|
|
|
A2 Rifle Handguards |
Compression molded of black composite polymer material (not injection molded - they will not melt during full auto fire). Non-reflective matte black finish designed to fit rifles with Triangular Handguard Cap. Include Internal Aluminum Heat Shields toprotect hands from barrel heat buildup under rapid fire.
|
|
|
|
|
|
Bushmaster DCM Free-Floater Kit - a Barrel Nut / Free-Floater Tube / Handguard Combination |
Meets all regulations for DCM competition, this forend system free floats the barrel from Barrel Nut forward for optimum accuracy. A Sling Swivel Loop is mounted onto the front of the tube - Handguards, Delta Ring, Weld Spring, Snap Ring and a Special Gas Tube are included.
|
|
|
|
|
|
Bushmaster Modular Accessories System (B.M.A.S.) Integral Flat-top Forend for Carbines |
Fits the A3 type "flat-top" rifle or carbine, and mounts using a replacement barrel nut (included - major disassembly of rifle required). With the new barrel nut in place and aligned for the gas tube, the Forend slides onto the A3 Upper's rail, then locking screws and a "locking block" clamp it firmly in place. This system free-floats the barrel, offers four Picatinny Rails, and a sling mounting plate with swivel stud. Machined aircraft aluminum finished in matte black, hard anodized, and vented for minimum weight.
NOTE: The B.M.A.S. Low Profile Rear Flip-up Sight (YHM-9680) will fit behind this unit on the A3 Upper's rail.
|
|
|
|
|
|
Bushmaster V Match Free-Floater Tubular Aluminum Forend for Rifles |
These hard anodized finished aluminum assemblies fit over standard and match profile barrels - "free floating" the barrel for optimum accuracy. Screwed directly onto the Upper Receiver replacing Handguards, Barrel Nut and Handguard Cap (requires removal of the front sight base - will not fit on Dissipator Barrels).
Options: For Rifles or Carbines
|
|
|
|
|
|
CAMO RT RIFLE SET OF 2 |
| RealTree Camo Rifle Length Handguards
|
|
|
|
|
|
Daniel Defense Omega Rail |
|
|
|
|
|
|
Desert Camo Furniture |
| These Desert Camouflage
Pattern Buttstocks, Handguard Sets and Pistol Grips make great
add-on accessories for your hunting rifle or carbine. Highest quality - same as on our standard rifles and carbines - tank dipped in beautiful and durable Desert Camo Pattern film.
|
|
|
|
|
|
M4 Dual Heatshield Handguards |
The M4 type Handguard is more oval in shape and taller in cross section, and the dual heatshields effectively increase barrel cooling - especially in rapid fire. This improved handguard set will fit most carbines with either type of round handguard cap. Molded of black thermoplastic composite material with heavy dual aluminum shields (one finished black/one silver). M4 Handguards with Single Heatshield: (1005-914-4573)
|
|
|
|
|
|
Rail Mount Switch Kit for Streamlight / SureFire Flashlight Pressure Switches |
A 3 piece kit that will mount Streamlight or Surefire switches onto any Picatinny Rail section without adhesives or velcro. The base piece snaps onto the rail and the insert encapsulates the switch pad - molded black Santoprene Thermoplastic.
|
|
|
|
|
|
REALTREE CAMO FURN SET-CARBINE |
| RealTree Camo CAR Furniture SET
|
|
|
|
|
|
REALTREE CAMO FURN. SET-RIFLE |
| RealTree Camo Rifle Furniture SET
|
|
|
|
|
|
Sure-Grip Full Length Rail Cover |
Black rubber grip panels for all rail forends - with Bushmaster logo molded in. They snap tightly onto the rails for protection and comfort. 5 3/4" long for full length coverage on carbine forends. Covers fifteen rail slots. Black rubber with 3 molded Bushmaster logos.
Options: Sure-Grip Full, Sure-Grip 1/3rd, Five Slot Low or Full-Length Low
|
|
|
|
|
|
SureFire M79 Flashlight Mount |
A sturdy aluminum and polymer mount that will clamp any 1" diam. flashlight (such as G2 above) to any rifle or carbine equipped with a Picatinny accessory rail. A heavy knurled thumbscrew clamps the unit onto the rail and flashlights are held with an adjustable cam-type locking clamp.
|
|
|
|
|
|
SureFire Scout Light M600B |
This two-battery Scout Light from SureFire clamps to any Picatinny rail by means of a knurled thumb screw on its rigid M75 rail mount. A powerful LU60A incandescent lamp module produces 65 lumens of light. A momentary-on remote tape switch is included as well as a tail cap on/off switch. Includes
* Two SureFire Lithium SF123A 3.0 Volt Batteries (10-yr. shelf life)
* Output/Runtime - Max. Output of 65 lumens with a 60 minute runtime
* Click on/off and momentary switch
* MilSpec Type III hard-anodized aluminum body
|
|
|
|
|
|
Varminter/Predator .308 Free Floater Forend for Carbines |
This vented, free-floating, three piece forend can be easily installed on your rifle for improved accuracy - we use it on our Varminter and Predator Rifles. A new barrel nut and locking ring replace your existing barrel nut (front sight, gas tube and barrel nut removal required). The aluminum free-float tube screws on, and after "timing" the cooling vents, a locking ring holds it in position. The center of the tube is knurled for a non-slip grip, and a standard stud is included for bipod or sling. All three parts are high quality aircraft aluminum - black anodize finished.
|
|
|
|
|
|
Varminter/Predator Free-Floater Tube |
| This vented, free-floating, three piece forend can be easily installed on your rifle for improved accuracy - we use it on our Varminter and Predator Rifles. A new barrel nut and locking ring replace your existing barrel nut (front sight, gas tube and barrel nut removal required). The aluminum free-float tube screws on, and after "timing" the cooling vents, a locking ring holds it in position. The center of the tube is knurled for a non-slip grip, and a standard stud is included for bipod or sling. All three parts are high quality aircraft aluminum - black anodize finished.
|
|
|
|
|
|
